Dual Band Radios |
|||||
AirEther BR54 |
|
Firmware * Important Note: Upgrading from RC7 to RC8 requires reset to factory default settings. See important notes included with the firmware before upgrading |
Replaced with |
||
AirEther SB54 |
|
Firmware * Important Note: Upgrading from RC7 to RC8 requires reset to factory default settings. See important notes included with the firmware before upgrading |
Replaced with |
||
AirEther SC54 |
|
Firmware * Important Note: Upgrading from RC7 to RC8 requires reset to factory default settings. See important notes included with the firmware before upgrading |
Replaced with |
||
Backhaul Bridge |
|||||
AirEther BR108 |
Firmware |
Replaced with BR3000 |
|||
Access Points |
|||||
AirEther AB54E Pro |
Firmware AB54E Pro & AB54E Pro R2: 1.2.14 AB54E Pro R3: |
Replaced with SB3000 |
|||
AirEther AB54 and AB54E |
Firmware 1.2.14
Resetor & Locator Tools
Optional : WDS repeater for 1km or less: 1.2.8 |
Replaced with SB54 |
|||
AirEther AP11
|
replaced with AB54E Pro |
||||
Client Bridges |
|||||
AirEther CB54 Series (CB54, CB54E, CB5418) |
Firmware Resetor & Locator Tools
|
Replaced with SC54 |
|||
AirEther CB11,CB11E and CB1118
|
replaced with CB54 (Retired) |
||||
Base Stations |
|||||
AirEther RB11
|
replaced with AB54E Pro |
Cameras and Accessories |
|||||
NVM1000 Video Management Software |
|||||
NVM2000 Network Video |
|||||
NVC3020MP2 v2 |
|||||
IP Installer Software |
|
||||
NVC210 |
|||||
NVC210R2NVC210WD |
Data Sheet |
||||
NVC300 |
|||||
NVC300R2NVC300WD |
|||||
NVC360 |
|||||
NVC800 |
|||||
NVC910 |
|||||
NVC1018/1026 |
|||||
NVC3018/3026 |
|||||
NVS460 |
|||||
NVS480R |
|||||
NVS480R V2 |
|||||
NVS480 V2 |
|||||
AirGoggle NVC100
|
|||||
AirGoggle NVC110
|
replaced with NVC210 |
||||
AirGoggle NVC110P
|
replaced with NVC210 |
||||
AirGoggle NVC110W
|
|||||
AirGoggle NVS410 |
|
replaced with |
|||
AirGoggle NVS440 |
replaced with |
||||
AirGoggle NVS440R |
replaced with |