LPS840-T1 Outdoor Gigabit PoE Switch


The LinkPower™ LPS840-T1 Series is All Weather 6-Port Gigabit PoE (Power over Ethernet) Switch with 2 RJ45 Gigabit Uplink Ports is the industry first outdoor weatherproof high speed gigabit Ethernet switch that delivers data and power over one single network cable protected with an IP66/68 compliant weatherproof enclosure. The outdoor weatherproof rating of the systems, i.e., IP66 or 68, is strictly based on how the top cover is closed. For the hinged cover without the four top cover screws, the outdoor weatherproof rating is IP66 and, otherwise, the outdoor rating is IP68 with the four top cover screws securely closed with the enclosure. The LPS800-T1 Series all weather gigabit PoE switch featured is designed for industrial and commercial applications, e.g., video surveillance, remote security, commercial wifi installations.


Inscape Data offers two different lines of LPS840, i.e., T1 & T2. The design of the T1 and T2 models are based on the different requirements of today's broad outdoor network applications, such as installation security, ease of installation, and product cost. The T1 models offer up to IP67 waterproof rating and meet higher installation security by hiding the network cable and power connectors securely inside of a weatherproof enclosure and reduce the product cost by using fewer connectors, while the T2 models offer IP68 waterproof rating and ease of installation, i.e., plug and play connectors for applications demanding rapid change of network configuration.

The LinkPower LPS840-T1/LPS840-T2 models are differentiated mainly by the type of the waterproof connectors used in the weatherproof housing, as illustrated below:



The LinkPower LPS840-T1 Series offers several sub-models as shown below:


Product Line

Product Model

Model Name Description

PoE Output

LPS800-T1 Outdoor Gigabit PoE Switch Series


Outdoor 10/100/1000Mbps 6-Port 802.3af/at PoE Switch with 2 RJ45 Gigabit Uplink Ports, Up to 30W and an Average of 15.4W per PoE Port, Not to Exceed 62W for a Total of 4 PoE Ports

30W per Port / 62W Total


Outdoor 10/100/1000Mbps 6-Port 802.3af/at PoE+ PoE Switch with 2 RJ45 Gigabit Uplink Ports, Up to 30W per PoE Port

30W per Port / 120W Total


The PoE technology significantly reduces the installation cost by eliminating the separate power supply units for PoE enable network devices, thereby reducing equipment and installation costs.


  • IP66/68 Compliant All Weather Enclosure
  • MTBF (Mean time between failures):190,000 hours (about 21 years)
  • Integrated Industrial 4KV Ethernet surge protection
  • IEEE 802.3af and 802.3at Type 2 Power over Ethernet (PoE) standard
  • 10/100/1000Mbps Auto-Negotiation and Auto-MDIX Gigabit Power over Ethernet RJ45 ports
  • Supports 802.3af PoE Power maximum 15.4 watts and 802.3at PoE Plus maximum 30Watts and 48V DC for each PoE port
  • Internal LEDs for individual port status: Network Activity, PoE Power, & System Power
  • Full wire-speed non-blocking reception and transmission
  • 1MBit frame buffer memory and 8K entries MAC address table
  • IEEE802.3x flow control for full-duplex mode; back pressure flow control for half-duplex mode
  • Supports integrated address look-up engine, automatic address learning and address aging
  • Supports Link Aggregation IEEE 802.3ad and fail over
  • Supports Jumbo Frame in all speeds (up to 10K bytes packet frame size)
  • Operating Temperature:-22ºF to +158ºF (-30ºC to +70ºC) C
  • Three-Year Limited Warranty

sys config

dimension drawing
Internal View


Standard Accessories

Power & Fiber Connector Kit
Power and Fiber Connector Kit
Ethernet Connector Kit
Ethernet Connector Kit
Wall Mounting Kit
AC Power Cable Kit
AC Power Cable Kit

Optional Accessories

MMK0001-S Mast Mounting Kit


Sales & Support

    Sales Inquiries
Inscape Data Corporation
2012 Hartog Drive
San Jose, CA 95131 USA
Contact Us | About Us