The LinkPower™ LPS3000-T1 Series is All Weather Multi-Port, i.e., 6, 10, and 14 ports, Managed Gigabit PoE (Power over Ethernet) Switch, All-in-One-Box, solutions with dual power output redundancy, i.e., 120V~240AC and/or 48V DC, is the industry first outdoor weatherproof ready high speed gigabit Ethernet switch that delivers data and power over one single network cable protected with an IP66/68 compliant weatherproof enclosure. The outdoor weatherproof rating of the systems is strictly based on how the top cover is closed. For the hinged cover without the four top cover screws, the outdoor weatherproof rating is IP66 and, otherwise, the outdoor rating is IP68 with the four top cover screws securely closed with the enclosure. The hinged enclosure offers great convenience for outdoor network applications required frequent changes of network configuration. The LPS3000-T1 is designed for outdoor industrial and commercial network applications, e.g., video surveillance, remote security, wireless mesh, and carrier wifi installations. The PoE port output from 15.4W to 30W and 95W per port based on the models (see the model table below),
and LPS3400ATMP-300-T1 / LPS3400ATMP-400-T1, L2+ Managed 4-Port Gigabit 802.3bt PoE Switch, offers up to 95 per PoE port and 300W / 400W total system power. In addition, the management feature enables remote monitoring, management, and control of the devices' status, including the following key management functions:
- Remote system reset
- QoS per port on policing, scheduler, traffic shaping, and store control
- Supports VLAN, GVRP, Dynamic VLAN MAC Address Authentication, IGMP, LACP Aggregation, STP, ERPS, & LLDP
- Port configuration, i.e., enable/disable, speed control
- PoE configuration, i.e., PoE modes (802.3af, 802.3at, 802.3bt) & PoE Priority based on the models
- Port security, allows setting different security level on each port with password, 802.1x, IP&MAC address Guard, RADIUS, & TACACS+
- Port thermal protection, turn off port when temperature exceeding the setting for device protection
The LPS3000-T1 Managed Outdoor PoE Series is designed for outdoor industrial and commercial network applications, e.g., video surveillance, remote security, wifi/wireless mesh, and telco carrier installations.
Inscape Data offers two different lines of LPS3000, i.e., T1 & T2 models. The design of the T1 and T2 models are based on the different requirements of today's broad outdoor network applications, such as installation security, ease of installation, and product cost. The T1 models offer up to IP67 waterproof rating
and meet higher installation security by hiding the network cable and power connectors securely inside of a weatherproof enclosure and reduce the product cost by using fewer connectors, while the T2 models offer IP68 waterproof rating and ease of installation,
i.e., plug and play connectors for applications demanding rapid change of network configuration.
The key difference between the LPS3000-T1 (Type 1) models and LPS3000-T2 (Type 2) models outdoor PoE switch products is illustrated as follow:
The LinkPower LPS3000-T1 Managed Outdoor Gigabit PoE Network Switch Series offers several sub-models as shown below:
Product Line |
Product Model |
Model Name Description |
PoE Output |
LPS3000-T1 Outdoor Managed Gigabit PoE Network Switch Series |
LPS3400AFM-T1 |
Outdoor Managed 10/100/1000Mbps 6-Port 802.3af/at PoE Switch with 2 Gigabit SFP Fiber Ports, Up to 30W and an Average of 15.4W per PoE Port, Not to Exceed 62W for a Total of 4 PoE Ports |
30W per Port / 62W Total |
LPS3400ATM-T1 |
Outdoor Managed 10/100/1000Mbps 6-Port 802.3af/at PoE Switch with 2 Gigabit SFP Fiber Ports, Up to 30W per PoE Port |
30W per Port / 120W Total |
LPS3400ATMP-300-T1 |
Outdoor Managed 10/100/1000Mbps 6-Port 802.3bt PoE Switch with 2 Gigabit SFP Fiber Ports, Up to 95W per PoE Port |
95W per Port / 300W Total |
LPS3400ATMP-400-T1 |
Outdoor Managed 10/100/1000Mbps 6-Port 802.3bt PoE Switch with 2 Gigabit SFP Fiber Ports, Up to 95W per PoE Port |
95W per Port / 400W Total |
LPS3800AFM-T1 |
Outdoor Managed 10/100/1000Mbps 14-Port 802.3af/at PoE Switch with 2 Gigabit RJ45 Ports and 4 SFP Fiber Uplink Ports (Port# 13/14 2.5Gbps), Up to 30W and an Average of 15.4W per PoE Port, Not to Exceed 150W for a Total of 8 PoE Ports |
30W per Port / 150W Total |
LPS3800ATM-T1 |
Outdoor Managed 10/100/1000Mbps 14-Port 802.3af/at PoE Switch with 2 Gigabit RJ45 Ports and 4 SFP Fiber Uplink Ports (Port# 13/14 2.5Gbps), Up to 30W per PoE Port |
30W per Port / 240W Total |
LPS3802AFM-T1 |
Outdoor Managed 10/100/1000Mbps 10-Port 802.3af/at PoE Switch with 2 Gigabit SFP Uplink Ports, Up to 30W and an Average of 15.4W per PoE Port, Not to Exceed 150W for a Total of 8 PoE Ports |
30W per Port / 150W Total |
LPS3802ATM-T1 |
Outdoor Managed 10/100/1000Mbps 10-Port 802.3af/at PoE Switch with 2 Gigabit SFP Uplink Ports, Up to 30W per PoE Port |
30W per Port / 240W Total |
The LPS3000-T1 Series All Weather 6, 10, and 14 PortGigabit PoE Switches are manageable network switch solutions and are designed designed to meet
the accelerating demand for powering the most demanding outdoor PoE devices without the requirement for the management feature. In addition, the
LPS3000-T1 Series All Weather managed Gigabit PoE Switch provide LED displays that show device status for easy power management and troubleshooting.
The PoE technology significantly reduces the installation cost by eliminating the separate power supply units for PoE enable network devices, such as Inscape Data’s
IP cameras and SB3000/BR3000 wireless products, thereby reducing equipment and installation costs.
- Dual Power Input Redundancy with 120V~240AC and/or 48V DC
- Supports 2.5Gbps on SFP 13 & 14 Uplink Ports
- IP66/68 Compliant All Weather Enclosure and the weatherproof rating is based on the top cover closed by the hinges only or together with screws
- MTBF:300,000 hours
- Remote manageable, remote reset, auto pin, network statistics, and SNMP on all LPS3000-T1 models
- Integrated Industrial 3KV Ethernet surge protection
- Supports IEEE802.1p QoS & IEEE802.1Q
- IEEE 802.3af and 802.3at Type 2 Power over Ethernet (PoE) standard
- 10/100/1000Mbps Auto-Negotiation and Auto-MDIX Gigabit Power over Ethernet RJ45 ports
- Supports 802.3af PoE Power maximum 15.4 watts and 802.3at PoE Plus maximum 30Watts and 48V DC for each PoE port
- Internal LEDs for individual port status: Network Activity, PoE Power, & System Power
- Full wire-speed non-blocking, 12G for LPS3400-T1 & 48G for LPS3800/3802-T1, reception and transmission
- 1MBit frame buffer memory and 8K entries MAC address table
- IEEE802.3x flow control for full-duplex mode; back pressure flow control for half-duplex mode
- Supports integrated address look-up engine, automatic address learning and address aging
- Supports Link Aggregation IEEE 802.3ad and fail over
- Each SFP fiber port supports single mode (9/125um) fiber transmission, the transmission distance can be up to 25km( Default dual fiber, can be customized single fiber)
- Supports Jumbo Frame in all speeds (up to 10K bytes packet frame size)
- Operating Temperature: -30 Degree C ~ +70 Degree C
- Three-Year Limited Warranty
Internal View
 |
 |
LPS3800-T1 |
LPS3400-T1 |
Standard Accessories |
PFCK0001-3
Power & Fiber Connector Kit
|
ECK0001-4
Ethernet Connector Kit
|
WMK0001
Wall Mounting Kit |
|
 |
|
WPCK-003
AC Power Cord Kit, U.S.
|
WPCK-004
DC Power Cord Kit, U.S. & International
|
Optional Accessories |
MMK0001-S
Mast Mounting Kit
Datasheet |
MMK0001-L
Mast Mounting Kit
Datasheet |
 |
|
SFP Module Accessories |
 SFP Duplex 1.25Gbps 3.3V Single-Mode Transceiver (Datasheet)
 SFP Duplex 1.25Gbps 3.3V Multi-Mode Transceiver (Datasheet)
|
|
Online Store 
Download
